- 1 Download September, 2019 Security: A107MUBU3ASI4 Mexico (Movistar) (TMM) / TMM
- 1.1 How to Check the Firmware A107MUBU3ASI4 through OTA
- 1.2 How to check Complete Model SM-A107M and Current Firmware
- 1.3 Step 1 : Download firmware update A107MUBU3ASI4 to model SM-A107M
- 1.4 Step 2 : Installing Official Firmware A107MUBU3ASI4 Android pie 9 on model SM-A107M through Odin
- 1.5 More Updates and Related Post to model SM-A107M
- 1.6 Speed Instructions :
Download firmware the SM-A107M . This firmware has version number PDA A107MUBU3ASI4 and CSC A107MOWT3ASJ1. The operating system of this firmware is Android 9 pie, with build date September 26, 2019. and Security patch date is September, 2019 security patch, with changelist 16947529 released for Mexico (Movistar) (TMM), .
if you don't receive a new security software update firmware A107MUBU3ASI4 for your samsung model SM-A107M here on samsung-up.com we will show you how you can do that to install a new security software update A107MUBU3ASI4 Follow us .
How to Check the Firmware A107MUBU3ASI4 through OTA
- Go to Settings
- Tap on ABOUT DEVICE
- Then tap on SOFTWARE UPDATE
- Here you find the UPDATE option TAP on it
- It will show you the latest information about your Firmware
How to check Complete Model SM-A107M and Current Firmware
- Go to Settings
- Than Tap on About
- Here you can see Model Number: SM-A107M
- For example: SM-A107M
- For example: Android pie 9
All Country have got Update A107MUBU3ASI4 for Samsung SM-A107M
This is the only "state" area that has been updated so far
This is a warning from Samsung-Up.com that this Guide / tutorial is only for SM-A107M only. Please do not try this guide in any other Android devices, it will work only with SM-A107M.
First, you need to check your device model number in: Settings » About (there you find your device name). And also note that we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk.
If you follow our instructions as it is which is stated below, it is very unlikely that your device will be damaged and above of all your Smartphone must be factory unlocked.
Step 1 : Download firmware update A107MUBU3ASI4 to model SM-A107M
Below you will find the direct link to download A107MUBU3ASI4 the
2019-09-01 Android security patch on model SM-A107M android pie 9 .
|Country||Mirror one||Mirror tow|
More Updates and Related Post
After the download you will have a zip file under name : like A107MUBU3ASI4-xxxxxxxxxxx.zip now all you need to install and update the new firmware on model SM-A107M will finded in Instructions below just dont forget take a Backup to all data on your phone .
Step 2 : Installing Official Firmware A107MUBU3ASI4 Android pie 9 on model SM-A107M through Odin
- Remember : This guide is to Install latest update A107MUBU3ASI4 update on model SM-A107M .
- Your device must have 70% Of battery.
- You need a Laptop or PC to perform this Action.
- You should be using Stock Firmware and not Custom ROM
- Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t loose your data)
- Make sure you have followed the steps properly. Don’t Skip and Read ! – We are not responsible for any damage that you make to your Phone.
- Download and Install the Samsung Kies Software : CLICK HERE
- Download and Install the Samsung USB Drivers : CLICK HERE
- Download and Extract the ODIN ZIP file on Desktop : CLICK HERE
- If you have downloaded and installed the file from above then you are good to Go – Read from Step 2
- First of all, enable the USB Debugging
- To Enable the USB Debugging you need also active the developer option, Now Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
- Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging
- Open the Extracted ODIN File called ODIN v3.12.7 exe or any versions of odin file using the Administrator – Right Click your mouse and Open using Administrator
- Now Reboot your Phone into Download Mode
- So First Turn your Phone off -> press and hold Home + Power + Volume Down buttons Until you see a download mode.
- Now Connect your Phone to PC using the USB Cables
- When you connect the USB cable you will see a blue sign in Odin
- Now Go back again Odin and Add the firmware which you downloaded from Above by Clicking AP/PDA Button
- Now Make sure re-partition is NOT ticked – Go to Option and see (Let the Auto Reboot and F-Reset Time be ticked)
- Click the start button, sit back and wait few minutes until you see a message pass. Once you see PASS then you can remove your Phone from the part. Don’t Panic if you see your Phone restarts while updating.