- 1 Download J415FXXU4BSI5: Official Android 9 pie for
Galaxy J4+ SM-J415F Sri Lanka (SLK) – SLK
- 1.1 How to Check the Firmware J415FXXU4BSI5 through OTA
- 1.2 How to check Complete Model SM-J415F and Current Firmware
- 1.3 Step 1 : Download firmware update J415FXXU4BSI5 to Galaxy J4+ model SM-J415F
- 1.4 Step 2 : Installing Official Firmware J415FXXU4BSI5 Android pie 9 on Galaxy J4+ model SM-J415F through Odin
- 1.5 More Updates and Related Post to Galaxy J4+ model SM-J415F
- 1.6 Speed Instructions :
Download firmware the Galaxy J4+ SM-J415F . This firmware has version number PDA J415FXXU4BSI5 and CSC J415FODM4BSI5. The operating system of this firmware is Android 9 pie, with build date September 16, 2019. and Security patch date is September, 2019 security patch, with changelist 16366856 released for Sri Lanka (SLK), .
if you don't receive a new security software update firmware J415FXXU4BSI5 for your samsung Galaxy J4+ model SM-J415F here on samsung-up.com we will show you how you can do that to install a new security software update J415FXXU4BSI5 Follow us .
How to Check the Firmware J415FXXU4BSI5 through OTA
- Go to Settings
- Tap on ABOUT DEVICE
- Then tap on SOFTWARE UPDATE
- Here you find the UPDATE option TAP on it
- It will show you the latest information about your Firmware
How to check Complete Model SM-J415F and Current Firmware
- Go to Settings
- Than Tap on About
- Here you can see Model Number: SM-J415F
- For example: SM-J415F
- For example: Android pie 9
All Country have got Update J415FXXU4BSI5 for Samsung
Galaxy J4+ SM-J415F
|Country||Region||Update Download Link||Android OS||Security patch|
||NPL||J415FXXU4BSI5||pie 9||September, 2019 security patch|
This is a warning from Samsung-Up.com that this Guide / tutorial is only for Galaxy J4+ SM-J415F only. Please do not try this guide in any other Android devices, it will work only with Galaxy J4+ SM-J415F.
First, you need to check your device model number in: Settings » About (there you find your device name). And also note that we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk.
If you follow our instructions as it is which is stated below, it is very unlikely that your device will be damaged and above of all your Smartphone must be factory unlocked.
Step 1 : Download firmware update J415FXXU4BSI5 to
Galaxy J4+ model SM-J415F
Below you will find the direct link to download J415FXXU4BSI5 the
2019-09-01 Android security patch on
Galaxy J4+ model SM-J415F android pie 9 .
|Country||Mirror one||Mirror tow|
More Updates and Related Post
After the download you will have a zip file under name : like J415FXXU4BSI5-xxxxxxxxxxx.zip now all you need to install and update the new firmware on Galaxy J4+ model SM-J415F will finded in Instructions below just dont forget take a Backup to all data on your phone .
Step 2 : Installing Official Firmware J415FXXU4BSI5 Android pie 9 on
Galaxy J4+ model SM-J415F through Odin
- Remember : This guide is to Install latest update J415FXXU4BSI5 update on Galaxy J4+ model SM-J415F .
- Your device must have 70% Of battery.
- You need a Laptop or PC to perform this Action.
- You should be using Stock Firmware and not Custom ROM
- Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t loose your data)
- Make sure you have followed the steps properly. Don’t Skip and Read ! – We are not responsible for any damage that you make to your Phone.
- Download and Install the Samsung Kies Software : CLICK HERE
- Download and Install the Samsung USB Drivers : CLICK HERE
- Download and Extract the ODIN ZIP file on Desktop : CLICK HERE
- If you have downloaded and installed the file from above then you are good to Go – Read from Step 2
- First of all, enable the USB Debugging
- To Enable the USB Debugging you need also active the developer option, Now Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
- Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging
- Open the Extracted ODIN File called ODIN v3.12.7 exe or any versions of odin file using the Administrator – Right Click your mouse and Open using Administrator
- Now Reboot your Phone into Download Mode
- So First Turn your Phone off -> press and hold Home + Power + Volume Down buttons Until you see a download mode.
- Now Connect your Phone to PC using the USB Cables
- When you connect the USB cable you will see a blue sign in Odin
- Now Go back again Odin and Add the firmware which you downloaded from Above by Clicking AP/PDA Button
- Now Make sure re-partition is NOT ticked – Go to Option and see (Let the Auto Reboot and F-Reset Time be ticked)
- Click the start button, sit back and wait few minutes until you see a message pass. Once you see PASS then you can remove your Phone from the part. Don’t Panic if you see your Phone restarts while updating.